PRO750 Concrete Polish Self Propelled Floor Grinder

• Type: Disc Grinder
• Power Source: Electricity
• Object: Saw Blade
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: PRO750
• Application: Construction
• Disc(Wheel) Type: Grinding Disc
• Material: Aluminum Alloy
• Working Style: High-speed universal
• Disc Diameter: 230mm
• Variable Speed: With Variable Speed
• Condition: New
• Polishing Grinding Speed: 0-1800 Rpm Variable Speed
• Inverter: 20HP/15kw
• Floor: Concrete Terrazzo Epoxy Floor
• Usage: Diamond Grinding Machine
• Use: Dry Polishing and Wet Polishing
• Operation: Remote Control with Wire
• Weight: 743kg
• Driven System: Dual Motor Driving Systems
• Function: Self-Propelled Floor Grinder
• Voltage: 380V
• Power: 20HP
• Transport Package: Wooden Case
• Specification: 185*85*135cm
• Trademark: JS Floor Systems
• Origin: Shanghai, China
• HS Code: 8464209000
• Production Capacity: 100 Set Per Month
• Package Size: 185.00cm * 85.00cm * 135.00cm
• Package Gross Weight: 600.000kg

Product Description

Product Description

Pro750 Stamped Concrete Polish Self Propelled Floor Grinder Polisher Machine

 

Self-propelled floor grinding and polishing machine - it grinds and polishes at a constant speed and minimizes the risk of operators' mistakes going too slow or too fast.

This is not a remote-controlled grinder but it boasts a similar rate of productivity and ease of use without the remote control price tag. An ideal solution for large commercial projects!

The dual motor driving systems can drive the floor grinder in four directions, turn left and right smoothly. Two motors which propel the machine forward with no effort from the operator. Operator can focus on the floor status. Advanced JS Self-propelled wire control technology and newest gear box systems make the floor grinding polishing an easy job, guaranteeing the floor is super flat and smooth.

 

Advantage of JS round planetary gear box:

Double layer gear, no belt
Aluminum integral casting gear box
Quick-change magnetic tooling systems
Variable-speed soft start
Both grinding and polishing, both wet and dry
Be good at high gloss and smooth surface polishing

The machine's revolution leads four grinding heads running in different directions, offsetting the traction effectively between the grinding heads to make the operation smooth and easy. The work area between each head enhances the pads to effectively run the operation.

 

Planetary grinder can be used for all grinding and polishing applications (wet or dry), adhesives and coating removal, surface repair and flattening of concrete, terrazzo, etc.

 

4 Head	Pro650	Pro750	Pro850	Pro950
Width	670mm	750mm	820mm	945mm
Disk size	254mm	280mm	320mm	360mm
Weight	430KG	480KG	550KG	600KG
RPM	0~1800	0~1800	0~1800	0~1800
Motor	15HP	20HP	25HP	25/30HP
AMPS	22	30	37	44
Phase	Three	Three	Three	Three

Details Images

 

20HP Motor And 24V LED Light

 

20HP Inverter And Timer

 

Self-Propelled Wire Control Box

Self-Propelled (Remote Control With Wire)

Dual Motor Driving Systems

 

Counter-rotate Grinding Plate

 

Gear Box

 

Rubber Dust Skirt, 2" Dust Port

Grinding Plate With Diamond Tools

Resin Polishing Pads

 

Waterproof Plug And Extra Weight

 

Front Walking Wheel

 

Optional Water Tank Seat

 

 

 

 

 

 

Related Products

Click the photo and send inquiry to us

 

CH750 Propane Floor Grinder

CH750 is a 750mm planetary drive concrete floor grinder polisher with variable speed and propane power. No more power cords or
power converters, reduce your grinding time and labor cost. CH750 is an excellent choice and is an effective and versatile concrete machine. The machine is powerful and robust while being very easy to operate.

*Kohler engine
*built-in vacuum port
*28L water tank
*adjustable operators handle

 

D1400 Ride On Planetary Grinder

Ride on grinders can drive the vacuum cleaner simultaneously, this machine is everything you need it to be. 

Bigger, heavier and faster.

*1422mm 30HP
*Wet or dry operation with optional water tank

 

JS700 Walk Behind Floor Grinder

The base of a square head grinder consists of a square gear box.Square head grinder can cut deeper, can be used for uneven floor, super hard floor, especially good at 16# and 30# metal diamond grinding.
*680mm 15HP

 

PRO850 Self-Propelled Grinder V9 Vacuum Cleaner

Self-propelled floor grinder grinds and polishes at a constant speed and minimizes the risk of operators' mistakes going too slow or too fast. This is not a remote-controlled model but it boasts a similar rate of productivity and ease of use without the remote control price tag. An ideal solution for large commercial projects!

*820mm 25HP

 

JS250 Concrete Scarifier

Scarifier is one of the most productive pieces of surface pre equipment for heavy removal jobs and to prep for overlay. They remove concrete faster and more aggressively than grinders. 

*250mm 10HP

 

 

A6 Small Planetary Floor Grinder

Designed for small jobs, residential projects that only single phase power is available. They get the balance between weight and efficiency, price and performance.

*594mm 7.5HP

 

C8 27" Burnisher

C8 is one of the most popular model on the market. It's equipped with a 10HP motor and timing belt. C8 produce a high-gloss finish through high-velocity continual rotations, reduce torque.

*27 inches 10HP

 

S320 Edger

Designed for edges and tough-to-reach space. This machine creates the perfect profile for edge grinding and polishing.

*320mm 3HP
*edge grinding on the left or right side

 

Guides & Instructions

 

Daily Maintenance Of The Grinder

1. After one day work is completed, the equipment should be routinely cleaned, and the sticky ash on the dust skirt and the grinding disc should be cleaned to avoid affecting the use of the next process and improve the working efficiency of the next day.

2. Clean the water tank once every other week to avoid the blockage of the water tank filter.

3. After one project is finished, you need to carry out a routine inspection of the machine. Tighten the screws connected to the machine and check whether the screws on the bottom plate rubber cushion are loose.

4. If the machine is often dry-grinded, the cold fan of the inverter should be cleaned every other month.

5. Change the gear oil regularly. The new machine can be replaced for the first time after 6 months of normal use, and then will be replaced once a year. Please add 90# or 92# gear oil, never add engine oil.

Company Introduction

JS Floor Systems has been established in 2009. Specializing in floor grinders, polishers, burnishers, scrubbers, vacuum cleaners and diamond tools. Our factory locates in Shanghai & Suzhou, China with professional R&D, technical support, production and sales team. Our service and products are appreciated by customers all over the world. JS grinders are available in several different sizes, operation modes and driven systems depending on your demands. JS Floor Systems have the largest range of floor grinders, covering everything from small edge grinder S320 to giant rider grinder D1400, operation modes available in walk behind, ride on, self-propelled and remote control, driven systems in gear construction. JS brand is recommended by customers as the machines are with superior quality, high efficiency, good service and reasonable price. Combined with JS industrial dust collectors, floor scrubbers and diamond tools, we offer a completed floor preparation system which guarantees that you finish the job with the best result and lower cost.

 

We have got the CE certificates, ISO 9001 and SGS approval. With professional R&D team, high tech Computer Numerical Control Center (CNC) and advantage welding robots, as well as the experienced support and marketing team, we are moving fast in this industry.

 

 

 

 

Manufacturing Technique

 

 

 

 

 

Gear box is the most important part of the grinding machine. With CNC machines, we ensure the high precision of gear box. Aluminum integral casting mold gear box provide the durability of the machine.

 

 

 

To get better quality control of the machine frame, the vacuum chamber and other welding parts, we introduced the welding robot. It highly increase the accuracy, repeat-ability, and throughput.
We'll keep our studying and exploring in new technology to achieve continuous progress.

 

 

 

Gear box workshop and Showroom

 

 

 

Why Choose Us

 

One year warranty and life-time maintenance & spare parts service is provided.

 

JS is recommended by several of the largest flooring suppliers and concrete producers in the world.

 

Polished concrete training

 

What we make with JS floor grinders

Packing&Shipping

All the machines are well installed and packed with accessories in crate.

 

 

 

FAQ

Q1: Do you make the metal and resin pads yourself?
A1: Yes, we have our own diamond workshop and make the diamond tools ourselves.

Q2: How long is production time for one container?
A2: For hand push machine is 2-3 weeks, for remote control models usually take 3-4 weeks.

Q3: You are based in Shanghai?
A3: Yes.

Q4: Do you have any advantages over other suppliers in terms of design?
A4: Yes. For example, we use seamless plastic water tank, aluminum casting mold grinder head which is stronger and add grinding pressure.

Q5: What is the warranty on the products?
A5: 1 year warranty for machine.

Q6: Do you recommend buying spare parts already with the order?
A6: Yes, we will recommend some spare parts.

Q7: What parts are usually needed for replacements?
A7: Resin pad holder, rubber cushion, dust skirt, switch.

Q8: Does your gear quality better than those from other company?
A8: Yes, we make the gear our own. JS gear is skewed tooth and being heat treatment processed which guarantee stable performance and long life time. But many company don't use such gear because this gear need high-precision process. We make the gears with CNC machine.

Q9: Do you offer diagrams for electrical and electronic layout for your machines?
A9: Yes, come with machines.

Q10: Is your company ISO registered and approved?
A10: Yes, we have got ISO, CE and SGS certificates.