S950 38 Inch Walking Behind Concrete Floor Grinder

• Customization: Available
• Type: Disc Grinder
• Power Source: Electricity
• Model NO.: S950
• Object: Saw Blade
• Application: Construction
• Disc(Wheel) Type: Grinding Disc
• Material: Aluminum Alloy
• Working Style: High-speed universal
• Disc Diameter: 230mm
• Variable Speed: With Variable Speed
• Function: Very Big Concrete Floor Grinder
• Driven Systems: Round Planetary Gear Box
• Grinding Plate: Four Plates Planetary
• Voltage: 380V
• Inverter: 30HP
• Use: Dry Polishing Wet Polishing
• Color: Red Blue Yellow
• Weight: 680 Kg
• Core Components: Bearing, Gearbox, Motor
• Grindinging Speed: 0-1800 Rpm
• Power: 30HP
• Transport Package: Wooden Case
• Specification: 180*100*130cm
• Trademark: JS Floor Systems
• Origin: Shanghai, China
• HS Code: 8464209000
• Production Capacity: 100 Set/Sets Per Month
• Package Size: 180.00cm * 100.00cm * 130.00cm
• Package Gross Weight: 700.000kg

Product Description

Product Description

S950 Floor Grinder For Granite Mixer Grinder For Floor Concrete Grinder Wet

 

What is a planetary grinder?

 

The base of a planetary grinder consists of a large main disc (the round gear box). 

Three or four smaller discs mount to the main disc, and these smaller discs turn at a different speed than the main disc. 

The smaller discs all lie along the same plane and make contact with the floor simultaneously, while the larger main disc lies on a different plane and does not make contact with the floor.

 

What's the advantage of JS planetary floor grinder?

 

Double layer gear, no belt

Aluminum integral casting gear box

Quick-change magnetic tooling systems

Variable-speed soft start

Both grinding and polishing, both wet and dry

Be good at high gloss and smooth surface polishing

 

Gear-driven forced planetary drive provides durability and flexibility of equipment. 

The double layer gear systems drive the grinding plates, large main disc (gear box) runs at 0-300 RPM, smaller discs run at 0-1800 RPM.

Planetary grinder can be used for all grinding and polishing applications (wet or dry), adhesives and coating removal, surface repair and flattening of concrete, terrazzo, etc.

4 Head	S650	S750	S850	S950
3 Head	A7	A8	A9	A10
Width	670mm	750mm	820mm	945mm
Disk size	254mm	280mm	320mm	360mm
Weight	430KG	480KG	550KG	600KG
RPM	0~1800	0~1800	0~1800	0~1800
Motor	15HP	20HP	25HP	25/30HP
AMPS	22	30	37	44
Phase	Three	Three	Three	Three

Details Images

30HP Motor And 24V LED Light

30HP Inverter

Three Phase Waterproof Plug

 

50L Water Tank

2" / 3" Dust Port And Rubber Dust Skirt

 

Grinding Plate

 

Cast Aluminum Gear Box

13.5mm Cast Aluminum Cover

Metal Bond Grinding Diamond Tools

Resin Polishing Pads

 

Timer

 

Control Box

 

Wire Holder

Add extra weight to increase grinding pressure

 

Remove extra weight for different hardness flooring

 

Customizable Grinding Plate

 

 

 

 

 

 

 

Related Products

Click the photo and send inquiry to us

 

CH750 Propane Floor Grinder

CH750 is a 750mm planetary drive concrete floor grinder polisher with variable speed and propane power. No more power cords or
power converters, reduce your grinding time and labor cost. CH750 is an excellent choice and is an effective and versatile concrete machine. The machine is powerful and robust while being very easy to operate.

*Kohler engine
*built-in vacuum port
*28L water tank
*adjustable operators handle

 

D1400 Ride On Planetary Grinder

Ride on grinders can drive the vacuum cleaner simultaneously, this machine is everything you need it to be. 

Bigger, heavier and faster.

*1422mm 30HP
*Wet or dry operation with optional water tank

 

R950 Remote Control Grinder

Remote control grinding and polishing machine provides the highest efficiency and productivity for heavy duty jobs. It can
significantly save both your time and labor cost!

*945mm 30HP
*planetary rotation

 

PRO850 Self-Propelled Grinder V9 Vacuum Cleaner

Self-propelled floor grinder grinds and polishes at a constant speed and minimizes the risk of operators' mistakes going too slow or too fast. This is not a remote-controlled model but it boasts a similar rate of productivity and ease of use without the remote control price tag. An ideal solution for large commercial projects!

*820mm 25HP

 

JS700 Walk Behind Floor Grinder

The base of a square head grinder consists of a square gear box.

Square head grinder can cut deeper, can be used for uneven floor, super hard floor, especially good at 16# and 30# metal diamond grinding.
*680mm 15HP

 

JS250 Concrete Scarifier

Scarifier is one of the most productive pieces of surface pre equipment for heavy removal jobs and to prep for overlay. They remove concrete faster and more aggressively than grinders. *250mm 10HP

 

 

C8 27" Burnisher

C8 is one of the most popular model on the market. It's equipped with a 10HP motor and timing belt. C8 produce a high-gloss finish through high-velocity continual rotations, reduce torque.

*27 inches 10HP

 

S320 Edger

Designed for edges and tough-to-reach space. This machine creates the perfect profile for edge grinding and polishing.

*320mm 3HP
*edge grinding on the left or right side

 

Guides & Instructions

 

How to use the hardener and polishing cream

1. Initial grinding with metal diamond #16 or #30, depends on the floor hardness.
2. Fine grinding with metal diamond #80, #150, #300 in steps.
3. Polish the floor with resin polishing pads #50, to repair the polishing scratch of metal diamonds.
4. Spray the hardener, keep the ground moist for 2 hours. If the floor absorbs the hardener quickly, please spray again.
5. Fine polishing the floor with resin polishing pads #150, #300, #500.
6. Super fine polishing with resin polishing pads #1000, #2000, #3000.
7. Spray the polishing cream after the super fine polishing #1000-3000. Apply the polishing cream with a heavy-duty brush broom, so the floor will be covered with the liquid evenly. The thinner the better.
After the polishing cream dry, use C8 high speed burnisher and DT021 black buffing pads to finish final polishing.

Company Introduction

JS Floor Systems has been established in 2009. Specializing in floor grinders, polishers, burnishers, scrubbers, vacuum cleaners and diamond tools. Our factory locates in Shanghai & Suzhou, China with professional R&D, technical support, production and sales team. Our service and products are appreciated by customers all over the world. JS grinders are available in several different sizes, operation modes and driven systems depending on your demands. JS Floor Systems have the largest range of floor grinders, covering everything from small edge grinder S320 to giant rider grinder D1400, operation modes available in walk behind, ride on, self-propelled and remote control, driven systems in gear construction. JS brand is recommended by customers as the machines are with superior quality, high efficiency, good service and reasonable price. Combined with JS industrial dust collectors, floor scrubbers and diamond tools, we offer a completed floor preparation system which guarantees that you finish the job with the best result and lower cost.

 

We have got the CE certificates, ISO 9001 and SGS approval. With professional R&D team, high tech Computer Numerical Control Center (CNC) and advantage welding robots, as well as the experienced support and marketing team, we are moving fast in this industry.

 

 

 

 

 

Manufacturing Technique

 

 

 

 

 

Gear box is the most important part of the grinding machine. With CNC machines, we ensure the high precision of gear box. Aluminum integral casting mold gear box provide the durability of the machine.

 

 

 

To get better quality control of the machine frame, the vacuum chamber and other welding parts, we introduced the welding robot. It highly increase the accuracy, repeat-ability, and throughput.
We'll keep our studying and exploring in new technology to achieve continuous progress.

 

 

 

 

 

 

 

Why Choose Us

 

One year warranty and life-time maintenance & spare parts service is provided.

 

JS is recommended by several of the largest flooring suppliers and concrete producers in the world.

 

Polished concrete training

 

What we make with JS floor grinders

Packing&Shipping

All the machines are well installed and packed with accessories in crate.

 

 

 

FAQ

Q1: Do you make the metal and resin pads yourself?
A1: Yes, we have our own diamond workshop and make the diamond tools ourselves.

Q2: How long is production time for one container?
A2: For hand push machine is 2-3 weeks, for remote control models usually take 3-4 weeks.

Q3: You are based in Shanghai?
A3: Yes.

Q4: Do you have any advantages over other suppliers in terms of design?
A4: Yes. For example, we use seamless plastic water tank, aluminum casting mold grinder head which is stronger and add grinding pressure.

Q5: What is the warranty on the products?
A5: 1 year warranty for machine.

Q6: Do you recommend buying spare parts already with the order?
A6: Yes, we will recommend some spare parts.

Q7: What parts are usually needed for replacements?
A7: Resin pad holder, rubber cushion, dust skirt, switch.

Q8: Does your gear quality better than those from other company?
A8: Yes, we make the gear our own. JS gear is skewed tooth and being heat treatment processed which guarantee stable performance and long life time. But many company don't use such gear because this gear need high-precision process. We make the gears with CNC machine.

Q9: Do you offer diagrams for electrical and electronic layout for your machines?
A9: Yes, come with machines.

Q10: Is your company ISO registered and approved?
A10: Yes, we have got ISO, CE and SGS certificates.