V2 Self Clean High Efficiency Concrete Floor Vacuum Cleaner

• Classification: Hand-held Vacuum Cleaner
• Type: Cyclone
• Application: Dry
• Purpose of Use: For Industrial Use
• Filtration: Dust Bag Filter
• Feature: With Bag
• Model NO.: V2
• Cyclone Dust Collector: Centrifugal Cyclone
• Certification: CE
• Function: outdoor Industrial Vacuum Cleaners
• Filtration Area: 28000 Square Centimeter
• After-Sales Service Provided: Video Technical Support
• Cfm: 360 Cube Meter Per Hour
• Warranty: 1 Year
• Machine Type: Industrial Vacuum Cleaner
• Keyword: Industrial vacuum Bag Floor Grinder
• Motor: 2.2kw
• Use: Clean The Dust for Concrete Grinder Polisher
• Color: Yellow, Blue or Customized
• Cleaning Type: Clean-in-Place (CIP)
• Filter: Cyclone + HEPA H13
• Fuel: Electric
• Power: 2200W
• Transport Package: Wooden Case
• Specification: 750*510*1200mm
• Trademark: JS FLOOR SYSTEMS
• Origin: Shanghai, China
• HS Code: 8421392390
• Production Capacity: 1000 Set/Sets Per Month

Product Description

Product Overview

Factory Price V2 Concrete Floor Grinder Vacuum

V2 is an industrial vacuum cleaner that is cyclone plus HEPA filter efficient industrial vacuum cleaner, disposable garbage bag, and negative pressure dust removal. It will be better to connect a pre-separator to use when needed.

Key Features:

Advanced technology for integrating the cyclone systems and bag collecting system; Dust collection efficiency reach to 99%;
Dust emission controlled below 30mg/Nm3;
High concentrations of dust below 100g/Nm3 can be collected;
Less than 1% air leakage rate;
Equipped air compressor to provide ancillary air pressure;
Apply to floor grinding and polishing, building and construction site.

Inside Filter

Dust Port

Control Button

Dedusting procedure (as above picture)

Soot cleaning steps: motor in the vacuum state, pull (1) vacuum plate, block dust, at the same time, the dust collection plate is pulled, and the small bucket on the pressure gauge pointer turns to the big direction, PTFE filter is contracting, when the gauge pressure at the set range (filter contraction largest state), stir (2) valve, air goes into the barrel inside, gauge pressure corresponding to the pressure value decreased. The filter is from contracting to normal at this time, Because the filter core vibrates (4), dust attached to the filter will fall off(5), so repeatedly for three to five times, soot cleaning effect, soot cleaning is completed, (1) press the vacuum valve down, can continue to dust, when the dust is more, pull down the dust bag, cut and tie it again.

How to work with floor grinder

1. The boot

Before dry grinding starts, connect the vacuum cleaner, connect the vacuum tube to the machine, connect the safe grounding power supply, connect the corresponding power supply of the equipment, the power indicator light is on, stand on the side of the machine, turn the emergency stop switch on, press the start button, the machine starts working.

2. Turn off the machine When the grinding machine stops working, press the emergency stop switch and unplug the vacuum tube. Pull down the main power switch and pull out the power connector.

3. Dust removal during the grinding process Vacuum cleaner after using for some time, the suction will abate, this time to remove dust, pull the dust aspirant, a pressure gauge to above 8, form vacuum dust barrel, mesh contraction, then drives rocker, make the air in, the screen to relax, dust fall off, can repeat three to five times to clean up, at this time, the filter is clean, the machine operating, too get the best grinding dust collection effect.

 

PRODUCT SPECIFICATIONS

Model	V2	V3
Power	1.1*2 KW	1.1*3 kw
Electricity	8amps	13amps
Weight	82KG	110KG
Filter area	28000CM2	44000CM2
Vacuuming caliber	2 inch	2 inch
Air volume	290m3/h	430m3/h
Cubage	Self drawn dust bag	Self drawn dust bag
Dedusting system	Manual negative pressure	Manual negative pressure
Filter system	vortex+ HEPA filter screen	vortex+ HEPA filter screen
Vacuum tube	10m	10m
Size	750*510*1200mm	900*630*1520mm
Optional single-phase voltage	220V/110V	220V/110V

Packing&Shipping

How we pack machines and accessories

All the machines are well installed and packed with accessories in the crate.

Wrapped with film internally and packed in a wooden box outside.

About Us

Shanghai Jiansong Industry And Trade Co., Ltd

JS Floor Systems has been established in 2009. Specializing in floor grinders, polishers, burnishers, scrubbers, vacuum cleaners, and diamond tools. Our factory locates in Shanghai & Suzhou, China with professional R&D, technical support, production, and sales team. Our Service and Products are appreciated by customers all over the world.

JS Floor Systems have the largest range of floor grinders, covering everything from small edge grinder S320 to giant rider grinder D1400, the operation made available in walk behind, ride on, self-propelled and remote control, driven systems in gear construction.

JS brand is recommended by customers as the machines are of superior quality, high efficiency, good service, and reasonable price. Combined with JS industrial dust collectors, floor scrubbers, and diamond tools, we offer a completed floor preparation system that guarantees that you finish the job with the best result and lower cost. We have got the CE certificates, ISO 9001, and SGS approval. With a professional R&D team, high-tech Computer Numerical Control Center(CNC), and advantage welding robots, as well as the experienced support and marketing team, we are moving fast in this industry.

Why choose us

Let Professional People Do Professional Things!

1, Experience gathering. We have been specialized in this field for over 10 years and have customers worldwide, we also have the largest range of flooring machines to match your different demands.

2, P rofessionalized factory. We have 2 factories in Shanghai & Suzhou, China, with perfect produce systems. Thanks to modern machinery, the production of our machines efficiency and quality are high and stable, get high appreciated by customers, many world notable floor preparation operator choose to cooperate with us.

3, Completed inspection system. We have detailed quality control systems to ensure every procedure match world quality standard, all our machines get CE/SGS/ISO9001 approval.

4, Professional sales team. To serve global customers, we build a scale sales team. After unified training, we will offer a one-to-one service for each client. Will offer our professional suggestions according to different customer's requirements.

5, Highly mature logistics transportation. We have cooperated forwarder, can offer you best freight service with the lowest price. Of course, we can cooperate to send cargo to your nominated forwarder if you need it.

6, High-efficiency after-sale service. To ensure all our customers can enjoy a wonderful flooring experience, we will offer spare parts within one year warranty, and 7*24 hours online support forever.

7, Innovative Design Team. Organized by tens of experienced engineers, we always follow the newest tendency and clients' requests to accomplish and improve our products. To make flooring easier is our mission.

FAQ

Q1: Are you a trading company or manufacturer? Do you also produce accessories?

A1: We are manufacturer, our factories are located in Shanghai and Suzhou, China, we produce both machine and accessories. Many customers have visited us, welcome!
Q2: Can you do a custom-made machine?
A2: Yes, we can provide OEM & ODM service, please contact us for more detailed information.
Q3: What is your packaging?
A3: We pack in hard wooden cases or plywood cases.
Q4: What is the delivery?
A4: It depends on your destination, feel free to send us an inquiry and we will help check the shipping cost and time for you.