Cc 20 Inch Concrete Floor Burnisher

• Type: Disc Grinder
• Power Source: Electricity
• Object: Saw Blade
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: CC
• Application: Construction
• Disc(Wheel) Type: Grinding Disc
• Material: Aluminum Alloy
• Working Style: High-speed universal
• Disc Diameter: 230mm
• Variable Speed: With Variable Speed
• Inverter: 5.5HP 4kw
• Speed: 0-1800 Rpm
• Engine Brand: Siemens
• Burnisher Brand: Js Floor Systems
• Unique Selling Point: High Operating Efficiency
• Operation: Hand Push
• Weight: 142kg
• Function: Floor Polishing and Burnishing
• Working Width: 20 Inches
• Voltage: 220V/380V
• Current: 8 AMPS
• Power: 4kw / 5.5HP
• Transport Package: Wooden Case
• Specification: 120*65*110CM
• Trademark: JS Floor Systems
• Origin: Shanghai, China
• HS Code: 8464209000
• Production Capacity: 100 Set Per Month
• Package Size: 120.00cm * 65.00cm * 110.00cm
• Package Gross Weight: 200.000kg

Product Description

Product Description

CC Burnishing Polisher Machine Propane Burnisher Concrete Floor Burnisher

 

Burnishers keep floors clean and shiny, without making them slippery, also protect floors for longer life.
A Burnisher works by spinning a special type of floor pad at high speed (1200-1800 RPM) to create friction on the floor. The friction causes the heat to mould the polish on the floor back to a smooth level surface, thus creating a good reflection.

 

20" burnisher CC is a light weight machine. It's equipped with a 5.5HP motor.

CC produce a high-gloss finish through high-velocity continual rotations.

Model#	C8	CC
Drive	Timing belt	V-belt
Disk Size	27"	20"
Weight	200KG	140KG
RPM	0~1800	0~1800
Motor	10HP	5.5HP
AMPS	16	8
Phase	Single / 3P	Single

 

Variable speed 0-1800 rpm.

CC can produce a high-gloss finish through high-velocity continual rotations.

 

 

 

 

 

 

 

 

Guides & Instructions

How to use the hardener and polishing cream

1, Initial grinding with metal diamond #16 or #30, depends on the floor hardness.

2,  Fine grinding with metal diamond #80, #150, #300 in steps.

3,  Polish the floor with resin polishing pads #50, to repair the polishing scratch of metal diamonds.

4,  Spray the hardener, keep the ground moist for 2 hours. If the floor absorbs the hardener quickly, please spray again.

5,  Fine polishing the floor with resin polishing pads #150, #300, #500.

6,  Super fine polishing with resin polishing pads #1000, #2000, #3000.

7,  Spray the polishing cream after the super fine polishing #1000-3000. Apply the polishing cream with a heavy-duty brush broom, so the floor will be covered with the liquid evenly. The thinner the better. 

 

After the polishing cream dry, use C8 high speed burnisher and DT021 black buffing pads to finish final polishing.

 

High-gloss finish

 

Preservative agent applying

 

Color flooring

 

Refurbished flooring

Related Products

Click the photo and send inquiry to us

 

CH750 Propane Floor Grinder

CH750 is a 750mm planetary drive concrete floor grinder polisher with variable speed and propane power. No more power cords or power converters, reduce your grinding time and labor cost. CH750 is an excellent choice and is an effective and versatile concrete machine. The machine is powerful and robust while being very easy to operate. 

*Kohler engine 

*built-in vacuum port 

*28L water tank 

*adjustable operators handle

 

D1400 Ride On Planetary Grinder

Ride on grinders can drive the vacuum cleaner simultaneously, this machine is everything you need it to be. 

Bigger, heavier and faster. *1422mm 30HP 

*Wet or dry operation with optional water tank

 

R950 Remote Control Grinder

Remote control grinding and polishing machine provides the highest efficiency and productivity for heavy duty jobs. It can significantly save both your time and labor cost! *945mm 30HP 

*planetary rotation

 

PRO850 Self-Propelled Grinder V9 Vacuum Cleaner

Self-propelled floor grinder grinds and polishes at a constant speed and minimizes the risk of operators' mistakes going too slow or too fast. This is not a remote-controlled model but it boasts a similar rate of productivity and ease of use without the remote control price tag. An ideal solution for large commercial projects! *820mm 25HP

 

JS700 Walk Behind Floor Grinder

The base of a square head grinder consists of a square gear box. 

Square head grinder can cut deeper, can be used for uneven floor, super hard floor, especially good at 16# and 30# metal diamond grinding. *680mm 15HP

 

A6 Small Planetary Floor Grinder

Designed for small jobs, residential projects that only single phase power is available. They get the balance between weight and efficiency, price and performance. 

*594mm 7.5HP

 

S320 Edger

Designed for edges and tough-to-reach space. This machine creates the perfect profile for edge grinding and polishing. *320mm 3HP 

*edge grinding on the left or right side

 

JS250 Concrete Scarifier

Scarifier is one of the most productive pieces of surface pre equipment for heavy removal jobs and to prep for overlay. They remove concrete faster and more aggressively than grinders. 

*250mm 10HP

 

Company Introduction

JS Floor Systems has been established in 2009. Specializing in floor grinders, polishers, burnishers, scrubbers, vacuum cleaners and diamond tools. Our factory locates in Shanghai & Suzhou, China with professional R&D, technical support, production and sales team. Our service and products are appreciated by customers all over the world. JS grinders are available in several different sizes, operation modes and driven systems depending on your demands. JS Floor Systems have the largest range of floor grinders, covering everything from small edge grinder S320 to giant rider grinder D1400, operation modes available in walk behind, ride on, self-propelled and remote control, driven systems in gear construction. JS brand is recommended by customers as the machines are with superior quality, high efficiency, good service and reasonable price. Combined with JS industrial dust collectors, floor scrubbers and diamond tools, we offer a completed floor preparation system which guarantees that you finish the job with the best result and lower cost.

 

We have got the CE certificates, ISO 9001 and SGS approval. With professional R&D team, high tech Computer Numerical Control Center (CNC) and advantage welding robots, as well as the experienced support and marketing team, we are moving fast in this industry.

 

 

 

 

 

Manufacturing Technique

 

 

 

 

 

Gear box is the most important part of the grinding machine. With CNC machines, we ensure the high precision of gear box. Aluminum integral casting mold gear box provide the durability of the machine.

 

 

 

To get better quality control of the machine frame, the vacuum chamber and other welding parts, we introduced the welding robot. It highly increase the accuracy, repeat-ability, and throughput.
We'll keep our studying and exploring in new technology to achieve continuous progress.

 

 

 

Gear Box Workshop And Showroom

 

 

 

 

Why Choose Us

 

One year warranty and life-time maintenance & spare parts service is provided.

 

JS is recommended by several of the largest flooring suppliers and concrete producers in the world.

 

Polished concrete training

 

What we make with JS floor grinders

Packing & Shipping

All the machines are well installed and packed with accessories in crate.

 

 

 

FAQ

Q1: Are you trading company or manufacturer?
A1: We are manufacturer and have factories in Shanghai and Suzhou, China. All the machines are shipped from Shanghai. Welcome to visit us!

Q2: Do you also produce diamond tools?
A2: Yes we produce both machines and diamond grinding / polishing pads.

Q3: Will the grinders come with resin pad holders?
A3: Yes, all the grinders include the magnet plates, resin pad holder, tool box and necessary accessories,

Q4: Can JS grinders be use for polishing?
A4: Yes of course. They can do both grinding and polishing, the RPM is 0-1800.

Q5: How long to produce?
A5: It depends on the models and qty, usually 3-15 days.